
Product code: SY-LAM-IKON-17W3
The Ikono — Double-Layer Iron Pendant Two concentric iron shades — a wide upper cone and a shorter stepped lower tier — stack beneath a domed canopy to direct light downward while cutting glare at seated eye level.
Price
AUD $60 / piece
Indicative piece price · final quote depends on spec, qty & freight.
MOQ
1 piece
Lead Time
3–7 business days
Incoterms
DDP
Colour: White
Size: ∅ 11.8″ x H 59.1″ / Dia 30cm x H 150cm
Quantity (number of units to quote)
Vendor MOQ: 1 pieceBuild a shortlist and request pricing directly from this provider. Final prices, availability and lead times are confirmed in your quote.
The Ikono — Double-Layer Iron Pendant Two concentric iron shades — a wide upper cone and a shorter stepped lower tier — stack beneath a domed canopy to direct light downward while cutting glare at seated eye level. A glass panel at the base of the lower shade diffuses the bulb's output into a soft pool below, making both frosted LEDs and clear Edison filaments equally effective. Available in white, red, or green body finish with a white shade interior on all versions, the Ikono suits kitchen islands, dining nooks, and reading corners where a compact pendant with clean Nordic geometry is needed. Features Glare-Free Two-Layer Shade Upper cone directs light down; lower tier intercepts direct bulb glare at seated eye level. Glass Diffuser Base Translucent glass panel at the lower shade base delivers an even glow — no visible hotspot below. Two Sizes 30 cm for compact spaces; 40 cm for dining tables and kitchen islands up to 160 cm. Adjustable Drop Height 59″ cable plus 19.7″ chain — trim at installation to the exact ceiling clearance needed. Three Body Finishes White, red, or green exterior with a white shade interior consistent across all versions. Universal Voltage AC 110–240 V worldwide. Hardwired ceiling mount; compatible with standard wall switches. E26 / E27 bulb — easily replaceable without tools Uses a standard E26 or E27 base. Unscrew the old bulb and replace it with a new one — no wiring required. Compatible with LED or Edison-style bulbs (not included). Body Finish White Red Green Shade interior is white on all finishes. Sizes Size S Small Ø 30 cm / 11.8″ Max drop 150 cm / 59.1″ Click to enlarge ↗ Size L Large Ø 40 cm / 15.7″ Max drop 150 cm / 59.1″ Click to enlarge ↗ Choosing your size The S (30 cm) works well over small dining tables up to 100 cm, reading nooks, and bedside positions. The L (40 cm) is better scaled for dining tables 120–160 cm long and open-plan kitchen islands. Both sizes share the same E26/E27 socket and suspension hardware. Bulb Recommendation E26 / E27 · 1 bulb per pendant · Bulb not included Best choice: Frosted A19 or G95 LED, 2700–3000 K, 6–9 W The glass diffuser panel at the base distributes light evenly — a frosted or opal LED (800 lm or less) removes any visible filament shadow on the shade interior. A clear ST64 Edison filament at 2200 K also works well, adding a warm visible glow through the glass panel when seen from below. Keep output below 800 lm in the S size; the double-layer shade concentrates light efficiently. Specifications Material Iron body · Glass diffuser panel Finishes White Red Green Shade Interior White (all finishes) Size S Ø 30 cm / 11.8″ · Max drop 150 cm / 59.1″ Size L Ø 40 cm / 15.7″ · Max drop 150 cm / 59.1″ Light source E26 or E27 · 1 bulb · Bulb not included LED or Edison-style · Replaceable without tools Wiring Hardwired Voltage AC 110–240 V Suspension 59″ adjustable cable + 19.7″ chain Control Compatible with standard wall switch (not included) Environment Indoor · Dry / Damp Certification North America · EU · Saudi Arabia · Australia Installation Notes Hardwired ceiling installation — a licensed electrician is recommended for the junction box connection. Compatible with standard wall switch (not included). Not dimmable unless a dimmable bulb and compatible dimmer are used. E26/E27 base — unscrew and replace the bulb anytime without tools. Bulb not included. For indoor use only. Not suitable for bathrooms or damp outdoor locations. Downloads & Resources Spec Sheet 3D Files Frequently Asked Questions Does the Ikono need an electrician to install? Yes — the Ikono is hardwired and connects directly to your ceiling junction box. A licensed electrician is recommended for the wiring step. The canopy covers a standard round junction box; the cable and chain come pre-attached. The on-site task is connecting the three wires (live, neutral, ground) and trimming the cable to the desired drop height. Which bulb works best with the double-shade design? A frosted A19 or G95 LED at 2700–3000 K and 6–9 W is the most practical choice — the glass diffuser at the base spreads output evenly with no visible hotspot. A clear ST64 Edison filament (2200 K) also works well and shows warm glow through the glass panel. Keep the bulb at or below 800 lm in the S size; the layered shade focuses light efficiently. How high should I hang the Ikono over a dining table? The standard guideline is 30–36 inches (75–90 cm) from the tabletop to the bottom of the shade. For the L size over a rectangular dining table, around 30–32 inches gives focused illumination without blocking sightlines. For the S size over a smaller table or nook, 28–30 inches keeps the light pool tight to the surface. What's the difference between the S and L sizes? The S (Ø 30 cm / 11.8″) suits compact dining tables up to 100 cm, reading corners, and bedside positions. The L (Ø 40 cm / 15.7″) is better scaled for dining tables 120–160 cm long, kitchen islands, and open-plan spaces. Both sizes share the same E26/E27 socket, suspension hardware, and body finish options. Is the Ikono certified for use in North America and Europe? Yes. The Ikono holds certifications compatible with North America, Saudi Arabia, Europe, and Australia, and operates on AC 110–240 V worldwide.
Sourcing, Incoterms, MOQ, QC, shipping, customs and warranty — answered. Need more detail? Visit our full FAQ or talk to a sourcing agent.
Add the product to your RFQ list and provide your quantity, destination, specifications and required date. Select a provider or ask matching providers to quote.
The listed MOQ is 1 piece. Confirm sample and bulk-order quantities with the provider.
Eligible quantity tiers and active offers are reflected in the indicative price. The lower eligible price applies; discounts do not stack. The provider’s quote confirms currency, scope, additional charges and validity.
Include the sample count, sizes, materials, colours, reference files and acceptance criteria in your RFQ. Ask the provider to confirm availability, sample fees, shipping and whether any fees are credited against a later order.
The listed lead time is 3–7 business days. Quantity tiers may have different lead times. Confirm production, inspection and transport dates in the quote.
Specify measurable sample and inspection requirements in your brief. Agree who performs inspections, what evidence is required and how rejected samples or goods are handled before accepting a quote.
Listed terms: DDP. Confirm the named destination, responsibilities and included charges in your quote.
Payment milestones, accepted methods, warranty and returns depend on the provider and product. Confirm them in writing before accepting the quote.
Other items in this category we can source for you.
Estimate sea or air freight for your route.
Calculate AU duty + 10% GST.
20ft / 40ft loading planner.
Door-to-door delivery estimator.
Importer guides & checklists.
Every importer question answered.
Sourcing, QC, freight, fulfilment.
Pick the right container option.
Submit RFQ or message us with quantity & specs.
Confirm unit pricing, MOQ and included charges.
Agree inspection requirements before dispatch.
Confirm freight, customs and delivery responsibilities.
Tell providers your target price, quantity and destination. Compare their quotes, included charges and proposed timelines.
AUD $60 / piece
MOQ: 1 piece · Qty: 1