
Product code: SY-LAM-ELOR-1A9X
Eloria Glass Linear Pendant Chandelier — fluted glass tubes, oval row, 52″ span, 14 × E12/E14, gold or nickel.
Price
AUD $140 / piece
Indicative piece price · final quote depends on spec, qty & freight.
MOQ
1 piece
Lead Time
3–7 business days
Incoterms
DDP
Colour: Gold & White
Size: ∅ 52" x H 14"
Quantity (number of units to quote)
Vendor MOQ: 1 pieceBuild a shortlist and request pricing directly from this provider. Final prices, availability and lead times are confirmed in your quote.
Eloria Glass Linear Pendant Chandelier — fluted glass tubes, oval row, 52″ span, 14 × E12/E14, gold or nickel. An oval row of fluted rectangular glass tubes — arranged in two outward-facing tiers along a 52-inch span — hangs from a rectangular gold-finish canopy on two parallel rods and a decorative chain. With 14 E12/E14 sockets distributed evenly along the length, the Eloria Linear delivers continuous, even light across a dining table, kitchen island, or billiards room without the dark gaps typical of multi-pendant linear fixtures. Hanging height adjusts via the 11.8″ rod and chain and can be extended on request. Available in Gold and Nickel frame finishes, five glass colors, and fully customizable in size and tube count. Hardwired — Electrician Required The Eloria Linear connects to your ceiling junction box. An electrician is required for installation. Controlled via a standard wall light switch (not included). Ensure the junction box is rated for the fixture weight — at 52″ span with 14 glass tube assemblies, this fixture is substantial. Custom Orders — Size, Finish, Chain Length The standard hanging rod is 11.8″ and can be extended on request. Size, frame finish, glass color, and tube count can all be customized. Contact our design team — we respond within 24 hours. Features 52″ Linear Span Covers a full 6–8 person dining table or kitchen island in a single fixture — no multi-pendant alignment needed. 14 Evenly Spaced Sockets E12/E14 sockets distributed along the full length — consistent brightness from end to end, no dark spots. Adjustable Hanging Height Standard 11.8″ rod included. Extension rods available on request to suit higher ceilings or custom drop requirements. Frame Finish Options Gold Warm brass-gold — pairs with Amber and Clear glass Nickel Brushed silver-grey — suits Clear, Grey, and White glass Glass Color Options Amber Warm honey — richest output over a dining table Clear Brightest output, maximum refraction Grey Muted, smoke-toned White Frosted, soft-diffused Pink Blush-rose tint Frame finish and glass color are selected independently at checkout. Dimensions Tap to enlarge Single size · customizable ∅ 132 cm × H 36 cm ∅ 52″ × H 14″ · 14 × E12/E14 sockets Canopy: L 42 cm × W 10 cm × H 2.5 cm Hanging rod: 11.8″ (extendable on request) Recommended ceiling height: 9 ft and above Bulb Recommendation — , max 15W per socket · 14 bulbs total A frosted E12 or E14 LED candelabra at 2700K warm white, 4–6W per bulb, is the standard recommendation. At 14 sockets, total draw at 5W each is 70W — manageable on a standard 15A circuit. Do not exceed 15W per socket. For Gold frame + Amber glass, 2700K maximizes the warm honey character. For Nickel + Clear glass, 3000K or 4000K gives a crisper, more contemporary tone. Bulbs not included. Specifications Dimensions ∅ 132 × H 36 cm / ∅ 52″ × H 14″ Canopy L 42 × W 10 × H 2.5 cm / L 16.5″ × W 3.9″ × H 1″ Materials Metal frame, fluted glass tubes Frame Finishes Gold · Nickel Glass Colors Amber · Clear · Grey · White · Pink Light Source E12 or E14 LED / Edison bulb (not included) · Max 15W per socket Bulb Count 14 sockets Voltage AC 110–240V Wiring Hardwired — ceiling junction box required Hanging Height 11.8″ rod included · extendable on request Control Standard wall light switch (not included) Customization Size · finish · tube count · chain length Environment Indoor only Certification North America · EU · AU · Saudi Arabia Downloads Spec Sheet 3D Files Frequently Asked Questions What table length does the 52″ span cover? The 52″ (132 cm) span works well over dining tables between 60″ and 84″ long — a 6 to 8-seat table. The general rule for linear fixtures is that the chandelier should run roughly two-thirds of the table length and be centered over it. For a 72″ table, the 52″ Eloria Linear is a close match. For longer tables, contact our design team about a custom wider configuration. How high should it hang above the dining table? The standard recommendation for dining room chandeliers is 30–34 inches above the table surface. With the fixture's 14″ body height and a 11.8″ hanging rod, the bottom of the glass tubes will sit roughly 48–50 inches below a standard 9 ft ceiling — which puts the bottom of the fixture at around 34 inches above a standard 30″ dining table. If your ceiling is higher, request an extension rod to maintain the correct drop. Can I use dimmable bulbs with this fixture? Yes. The fixture is compatible with dimmable E12/E14 LED bulbs paired with a trailing-edge LED dimmer switch. At 14 sockets, ensure your dimmer is rated for the total wattage — 14 bulbs × wattage per bulb. Always confirm the dimmable label on the bulb packaging; non-dimmable LEDs on a dimmer will flicker or fail early. Which frame finish pairs best with each glass color? Gold + Amber is the warmest, most cohesive combination — the frame and glass share the same warm-yellow tone and the effect is rich and atmospheric over a wooden dining table. Gold + Clear adds brightness while keeping the warm frame visible. Nickel + Clear or Nickel + Grey produces a cooler, more contemporary look suited to modern kitchens and minimalist dining spaces. Nickel + Pink is the most distinctive pairing for a bedroom or lounge application. Is the Eloria Linear certified for North America? Yes. Certified for North America, Saudi Arabia, Europe, and Australia. Operates on AC 110–240V worldwide — no voltage converter needed.
Sourcing, Incoterms, MOQ, QC, shipping, customs and warranty — answered. Need more detail? Visit our full FAQ or talk to a sourcing agent.
Add the product to your RFQ list and provide your quantity, destination, specifications and required date. Select a provider or ask matching providers to quote.
The listed MOQ is 1 piece. Confirm sample and bulk-order quantities with the provider.
Eligible quantity tiers and active offers are reflected in the indicative price. The lower eligible price applies; discounts do not stack. The provider’s quote confirms currency, scope, additional charges and validity.
Include the sample count, sizes, materials, colours, reference files and acceptance criteria in your RFQ. Ask the provider to confirm availability, sample fees, shipping and whether any fees are credited against a later order.
The listed lead time is 3–7 business days. Quantity tiers may have different lead times. Confirm production, inspection and transport dates in the quote.
Specify measurable sample and inspection requirements in your brief. Agree who performs inspections, what evidence is required and how rejected samples or goods are handled before accepting a quote.
Listed terms: DDP. Confirm the named destination, responsibilities and included charges in your quote.
Payment milestones, accepted methods, warranty and returns depend on the provider and product. Confirm them in writing before accepting the quote.
Other items in this category we can source for you.
Estimate sea or air freight for your route.
Calculate AU duty + 10% GST.
20ft / 40ft loading planner.
Door-to-door delivery estimator.
Importer guides & checklists.
Every importer question answered.
Sourcing, QC, freight, fulfilment.
Pick the right container option.
Submit RFQ or message us with quantity & specs.
Confirm unit pricing, MOQ and included charges.
Agree inspection requirements before dispatch.
Confirm freight, customs and delivery responsibilities.
Tell providers your target price, quantity and destination. Compare their quotes, included charges and proposed timelines.
AUD $140 / piece
MOQ: 1 piece · Qty: 1