Tree Branch Staircase Chandelier

Product Details

Tree Branch Staircase Chandelier — brass branches, crystal cascade, 11.8 ft drop At 360 cm / 11.8 ft from canopy to lowest crystal, this chandelier is built for the volume of a double-height foyer or open staircase. Hand-welded brass branches fan outward at the top and taper into finer twigs below, with cut-crystal droplets suspended throughout. G9 sockets hidden among the upper branches throw warm light through the crystals, scattering it across the entire form rather than from a single point. At 100 kg / 220 lb, the piece reads as architecture — meant to be walked beneath and seen from every floor of the house. Freight delivery · professional installation required Ships LTL freight in a custom crate. Ceiling must support 100 kg (220 lb) — verify joist with a structural professional and use a hardwired junction box rated for the load. A licensed electrician and a two-person rigging team are required for hanging. Features Hand-welded brass Each branch shaped and joined by hand — no two pieces identical. Cut-crystal cascade Crystal drops suspended throughout for multi-point light refraction. For 12 ft+ ceilings 360 cm drop scaled for staircases and double-height foyers. Size Tap to enlarge Single size Ø 59″ × H 141.7″ 220 LB Ø 150 cm × H 360 cm · 100 kg Canopy wire: 150 cm (extendable on request) Recommended ceiling: 12 ft / 3.6 m or higher Recommended Bulb G9 LED, 3–5 W, 2700–3000 K warm white, frosted finish. Frosted bulbs prevent harsh hotspots through the crystal drops. For dimming, choose G9 dimmable LEDs and pair with a Triac (leading-edge) wall dimmer — the chandelier is hardwired with a standard push-button switch by default. Specifications Dimensions Ø 150 cm × H 360 cm / Ø 59″ × H 141.7″ Weight 100 kg / 220 lb Frame Hand-welded brass branches, brass finish Drops Cut crystal Light source G9 sockets, 5 W max per socket (bulb not included) Voltage AC 110–240 V Wiring Hardwired · 150 cm canopy wire (extendable on request) Control Push-button switch · Dimmable with G9 dimmable LEDs + Triac dimmer Mounting Ceiling, hardwired junction box Environment Indoor only Shipping LTL freight (custom crate) Certification North America · EU · Australia · Saudi Arabia Downloads Spec Sheet Frequently Asked Questions What ceiling does this require, and how is the weight supported? A solid joist or steel beam capable of holding at least 150 kg (330 lb) — three times the chandelier weight, per standard rigging practice. Drywall anchors alone are not sufficient. We recommend a structural inspection before purchase if you are unsure. How does it ship, and who installs it? Ships LTL freight in a custom wooden crate; curbside delivery is standard. Installation requires a licensed electrician plus a two-person rigging team — typically 3–4 hours including assembly of the crystal drops, which are packed separately to prevent transit damage. Are the bulbs included? Is it dimmable? Bulbs are not included. The fixture uses G9 sockets (5 W max each); we recommend G9 LED dimmable bulbs at 2700–3000 K. Dimming requires both dimmable bulbs and a Triac wall dimmer — the default push-button switch operates on/off only. Will my piece look exactly like the photos? Branch placement varies between pieces — each frame is welded by hand, so the silhouette is consistent but no two are identical. Crystal drops are individually hung on site, allowing some control over the final density and length.