Lattice Chandelier

Product Details

A multi-tier wire-frame chandelier — black metal lines outline 3D polyhedral volumes stacked vertically, with cylindrical 3W LED terminals suspended below the lower tier. Designed for grand-scale architectural spaces: hotel lobbies, two-story atriums, restaurant entrances, gallery halls, and stairwells. Eight size and configuration combinations (20-, 43-, or 46-light arrangements at multiple drops up to 13 ft) to fit ceiling heights from 9 ft to 16+ ft. ⚠ Architectural installation — read before ordering The Lattice Chandelier is a heavy, complex, large-format fixture. The 46-light configuration weighs ~51 lbs; the largest 43-light drop reaches 13 ft. To ensure safe installation and long-term stability: Reinforced ceiling support is mandatory — engineering review recommended for residential ceilings or any drop over 8 ft. Licensed electrician with experience in chandelier installation strongly recommended — typical install time is 4–6 hours with two installers. Confirm your ceiling height matches the drop height before ordering. The 13 ft drop requires a minimum 14 ft ceiling. Pre-installation: a scaffold or lift is typically required, not a step ladder. Features Multi-tier polyhedral frame Black metal lines outline stacked 3D volumes — reads as architectural drawing brought into the room. 3W integrated LED terminals Each terminal is a sealed cylindrical LED — no bulbs to source. Total output scales with light count (60W / 129W / 138W). 8 size + drop combinations 20, 43, or 46 lights · drops from 43″ up to 13 ft · sized to fit standard rooms or grand atriums. Available Configurations 20-Light · for standard ceilings Variant Diameter Drop Weight Standard Drop Ø47.2″ (120 cm) 78.7″ (200 cm) ~13 lbs (6 kg) Long Drop Ø47.2″ (120 cm) 110″ (280 cm) ~13 lbs (6 kg) 43-Light · for atriums & tall stairwells Variant Diameter Drop Weight Compact 9.8 ft Ø35.4″ (90 cm) 118″ (300 cm) ~42 lbs (19 kg) Tall 13 ft Ø35.4″ (90 cm) 157.5″ (400 cm) ~42 lbs (19 kg) Wide-Tall 13 ft Ø59″ (150 cm) 157.5″ (400 cm) ~42 lbs (19 kg) 46-Light · for grand halls & commercial Variant Diameter Drop Weight Compact 3.6 ft Ø35.4″ (90 cm) 43.3″ (110 cm) ~51 lbs (23 kg) Medium 6.6 ft Ø35.4″ (90 cm) 78.7″ (200 cm) ~51 lbs (23 kg) Tall 9.2 ft Ø35.4″ (90 cm) 110.2″ (280 cm) ~51 lbs (23 kg) Finish Matte Black (wire frame) Black (LED terminal housing) Clear (LED lens) Specifications Material Powder-coated metal wire frame · plastic LED terminal housings · clear acrylic lenses Light source Integrated 3W LED per terminal — no bulb replacement (G9 base internal) Total wattage 20-light: 60W · 43-light: 129W · 46-light: 138W LED lifespan 30,000+ hours Voltage AC 110–240V (universal) Mounting Hardwired ceiling mount with reinforced canopy (Ø19.7″) Frame finish Matte black powder-coated Cable length 118″ (300 cm) on the longest standard variant; longer drops on request Control Compatible with TRIAC dimmers and standard wall switches (not included) Certification Certified for North America, EU, Australia, and Saudi Arabia Warranty 3 years on LED terminals · 2 years on frame and wiring Installation Notes Required: reinforced ceiling support (concrete beam, steel structural member, or engineered residential reinforcement). Drywall alone will not hold the 46-light at 51 lbs over its lifetime. Required: licensed electrician + scaffold or lift. Two-installer minimum. Plan 4–6 hours for the install of medium and large configurations. LED terminals are pre-wired into the frame and individually replaceable from below — failed LED terminals can be swapped without removing the whole chandelier. Indoor dry locations only — not suitable for outdoor or high-humidity environments. Downloads & Resources Spec Sheet Install Guide (20-light) Install Guide (43-light) Install Guide (46-light) FAQs Which configuration fits my space? By ceiling height: 9 ft (residential dining) → 20-light Standard or 46-light Compact 3.6 ft. 11–12 ft (foyer, large dining) → 20-light Long Drop or 46-light Medium. 14+ ft atrium / two-story foyer → 43-light Tall or 46-light Tall. 16+ ft commercial atrium → 43-light Wide-Tall (Ø59″). Email admin@spotyard.com.au with your ceiling height and room photos for a recommendation. Can I install this myself? We strongly recommend against DIY for the 43-light and 46-light configurations — they weigh 42–51 lbs and require reinforced mounting, structural assessment, and 4–6 hours of two-person assembly with electrical work. The 20-light at 13 lbs is more manageable for a qualified DIYer with electrical experience, but a licensed electrician is still recommended. Improper installation risks fall hazards. If an LED terminal fails, can I replace just that one? Yes. Each cylindrical LED terminal connects to the frame via a sealed quick-disconnect — a failed terminal can be swapped from below without removing the chandelier. We keep replacement terminals in stock for 5 years after your order. Within 3-year LED warranty, replacements are free. How bright is it total? 20-light: 60W LED ≈ 4,800 lumens (equivalent to ~480W incandescent). 43-light: 129W ≈ 10,300 lumens. 46-light: 138W ≈ 11,000 lumens. Use TRIAC dimmer to scale brightness for the room. At full output, the 46-light is appropriate for spaces of 600+ sq ft with 12+ ft ceilings. What's the warranty? 3-year warranty on the LED terminals (rated 30,000+ hours, ~27 years at 3 hr/day). 2-year warranty on the wire frame, canopy, mounting hardware, and wiring. Replacement LED terminals available paid-service beyond warranty. Email admin@spotyard.com.au with photos for any claim.