Donut Travertine Pendant Lamp

Product Details

Rule 32 authorized-service framing. Material confirmed: travertine + wood part + metal downrod. Replace tokens before publishing: IMAGE_URL_1, IMAGE_URL_2 — Schema.org image URLs DIAGRAM_URL — Shape Diagrams thumbnail + click-to-enlarge target --> A donut travertine pendant — a flat, rounded ring of natural travertine on a slim black downrod, with an open base that casts a warm downward glow. The hand-cut stone reads soft and pebble-smooth, with the porous surface catching light along its curve. ⌀7.9″ × H2.8″, integrated LED. For dining tables, kitchen islands, bedsides, and entryways. Features Rounded donut form A flat, soft travertine ring — low and wide, with rounded edges that read calm and pebble-like. Natural travertine Hand-cut stone with open pores and color banding — every piece reads slightly differently. Integrated LED Built-in LED in 2700K warm white casts a soft downward pool from the open base. AC 110–240V. About natural travertine The ring is hand-cut from natural travertine. Open pores, surface pitting, and color banding vary piece to piece — these are core characteristics of the stone, not defects or damage. No two are identical. About the wood part The internal holder is real wood — grain pattern and tone vary by piece. It is largely concealed within the fixture, and the photograph shows a representative sample. Dimensions & Diagrams ⌀7.9″ (20 cm) × H2.8″ (7 cm) · adjustable downrod. Click any diagram to enlarge. Specifications Material Travertine, Wood, Metal Body finish Black metal downrod and canopy; wood internal holder Shade finish Natural travertine Dimensions ⌀7.9″ × H2.8″ (⌀20 × H7 cm) Light source Integrated LED · 2700K warm white · dimmable LED service LED replaceable at authorized service Voltage AC 110–240V (universal) Mounting Hardwired, ceiling-suspended on a slim rigid downrod Moisture rating IP20 — indoor, dry locations only Control Compatible with standard wall switch or dimmer (not included) Certification Listed · North America · CE · SAA · SASO · KC Installation Notes Hardwired ceiling install — a licensed electrician is recommended. The fixture hangs from a slim rigid downrod; over a table or island, set the drop so the base of the stone sits 30–36″ above the surface. The LED is integrated; end-of-life replacement is handled at authorized service — contact us with your order number rather than replacing the whole fixture. Dimmable with a compatible wall dimmer (not included). Travertine is a porous natural stone — open pores, surface pitting, and color banding are core characteristics of the material, not flaws or damage. No two rings are identical. The wood holder is real wood — grain and tone vary by piece. Indoor dry locations only (IP20); keep clear of direct water, as stone and wood both absorb moisture. Downloads & Resources Spec Sheet Request 3D Files FAQs How is this different from the other travertine pendants? Its shape and orientation. The Donut is a low, wide travertine ring that hangs flat and casts light down through an open base — a quiet, horizontal silhouette. The Sliced Globe is a cut sphere, the Ribbed a vertical ribbed cylinder, the Hourglass two stacked bowls, and the Squircle a drum under a square plate. Pick Donut for the lowest-profile, most pebble-like look. The travertine has holes and pits — is that a defect? No — those are natural to travertine. Open pores, surface pitting, and color banding are core characteristics of the stone, not flaws or shipping damage. The ring is hand-cut, so no two are exactly alike; that variation is the point of a natural-stone fixture. Is the LED replaceable? The LED is integrated and rated over 30,000 hours — roughly 25 years at 3 hours of daily use. It isn't a user-swappable bulb; if it fails within or after the warranty period, contact authorized service with your order number for a replacement LED module rather than replacing the whole fixture. How low does it hang, and where does it work best? It hangs from a slim rigid downrod, so the drop is fixed on install (shortened on-site, or ordered longer for stairwells). The low ⌀7.9″ × H2.8″ profile suits a single spot over a nightstand, a small table, or in a row over an island. Email us your ceiling height for a custom drop. Can I install it in a bathroom, and what's the warranty? Only away from water — it's rated IP20 for indoor dry locations, so keep it clear of shower or tub spray. Travertine is porous and absorbs moisture. 2-year warranty on the fixture and wiring; the LED is covered under the same warranty. Email support replies within one business day at hello@spotyard.com.au.